Last Updated on
It doesn’t matter what kind of work you plan to do on your vehicle. What matters is that you do it safely with the best jack stands you can find.
Unfortunately, the market is flooded with jack stands of dubious quality. It is hard to find an easy-to-use, sturdy, lightweight, and inexpensive jack stand.
We’ve spent a lot of time researching to bring you this list of eight best jack stands. With our help, you’ll be working on your vehicle without a single worry.
8 Best Jack Stands in 2020
Camco Olympian 44561 Aluminum Jack Stand
This lightweight jack stand is a smart choice if you are an RV owner.
Camco Olympian 44561 Aluminum jack stand has an aluminum frame and a steel central screw. It weighs 3.5 pounds, which makes it easy to carry.
The frame is durable and capable of surviving lots of punishment. Olympian 44561 has a weight capacity of three tons, which is good enough for most RVs and campers out there.
The saddle is rubberized, which is great if you worry about scraping your vehicle’s paint. This jack stand uses a screw lock. It is easy to use and sturdy, but it will take you some time to set it up.
Camco Olympian 44561 is not a good choice for low-profile vehicles. The edges of this tool are sharp, so you should take extra care while using it.
Finally, this is the best jack stand for RVs and campers. It is easy to store and accurate, but it will take you some time to get used to working with it. If you don’t mind taking the extra time to work on your vehicle, this jack stand might be an awesome choice.
Torin T43004 Big Red Aluminum Jack Stand
Torin is a brand known for creating quality tools. Its T43004 Big Red Aluminum jack stand can hold up to three tons, and it is easy to use.
If you have never used a jack stand, the T43004 is a good starting tool. It is the best jack stand for low-profile vehicles, but it can also lift larger vehicles. It is not expensive, but similar models can be found at a lower price.
The large saddle surface area is awesome at supporting heavy loads while delivering good contact to the vehicle. Big Red meets ASME safety standards, which is good for peace of mind.
This jack stand is easy to store because it can break down. It is a solid tool capable of surviving plenty of punishment.
The T43004 Big Red employs a pin lock, which makes it stable but limits versatility. We don’t like the small hexagonal base; we wish it were larger.
All in all, if you need a durable beginner-friendly jack stand, but you don’t mind getting only five height settings, consider the TorinT43004 Big Red Aluminum jack stand.
Cartman Jack Stand
Cartman jack stand is the best jack stand for amateurs.
It is a lightweight tool that has a capacity of three tons. You won’t have any problems storing this jack stand as it takes up a small space. It comes with a tough ratchet bar that will make you use this jack stand efficiently.
This is an ANSI-compliant steel tool that won’t drain your wallet. It can extend more than enough to hold medium-sized vehicles and some SUVs. But, don’t try using it on vehicles with a very high profile.
The red powder coating keeps the rust away and prolongs the durability of the Cartman jack stand. The base works great at distributing the load. So, this jack stand won’t fail under a heavy load.
Unfortunately, some Cartman jack stands come with sloppy welding. You should inspect your Cartman jack stand carefully and return it if you notice poor welding.
If you want an affordable jack stand that will last you a long time, you should consider the Cartman jack stand. It is a sturdy and reliable tool, assuming that you receive it with quality welds.
ESCO 10498 Jack Stand
If you own an SUV and you want to do some repairs, then the ESCO 10498 jack stand could be a great choice.
This is a lightweight tool that almost anyone can use without too much hassle. It comes with a stand consisting of three legs with circular bases.
The pin lock system assures that ESCO 10498 remains in position you want it to be in. You only have five height options, but you will easily remove the pin since it comes with a ring attached to it.
This jack stand is powder-coated, which makes it resist rust-related problems. The rubber top pad can easily be removed and replaced when you notice signs of damage.
The ESCO 10498 is awesome for pinch welds that form the lower chassis of a vehicle. It can withstand up to three tons of weight, but the welds don’t look as good as we would like them too. Fortunately, the quality doesn’t suffer.
This is the best jack stand for SUVs, but it isn’t cheap. Other manufacturers offer jack stands in pairs, while ESCO gives you only one jack stand. Luckily, this is a durable and stable tool worth its price.
Powerbuilt 640912 All-In-One Bottle Jack Stand
If you are a pro and you need the best jack stand, the Powerbuilt 640912 All-In-One Bottle jack stand could be what you need.
This is not only a stand but a hydraulic jack as well. You won’t have any problems lifting your vehicle but bear in mind that this tool is a bit pricey.
Powerbuilt 640912 is a precise tool that can handle up to three tons of weight. You can use is on many types of vehicles, but not on low-profile cars.
This jack stand has three safety features, which makes it one of the safest jack stands we’ve reviewed. Moreover, it meets ANSI standards.
The powder coating is great at preventing rust, and the welds are good-looking. The Powerbuilt 640918 All-In-One Bottle jack stand is a steel tool, which makes it weigh 22 pounds.
Unfortunately, this is not a tool for amateurs. A minor problem concerns the short handle, but the bigger one is related to reports of hydraulic fluid leaking. Luckily, leak reports are rare.
All in all, if you are a pro and you need a safe jack stand, consider giving the Powerbuilt 640918 All-In-One Bottle jack stand a try.
Powerzone 380035 Steel Jack Stand
If you are a newbie, then the Powerzone 380035 Steel is the best jack stand for you.
It comes with a weight capacity of two tons, which is good enough for small vehicles. It has a sturdy steel frame, but don’t try using it on heavy vehicles.
The lifting range is pretty good, and the ratchet lock is extremely easy to use. The steel base is wide and provides you with plenty of stability.
You can easily carry this jack stand with you because it weighs only 10.9 pounds and because it has a rubberized handle. We love the fact that this jack stand can be used on low-profile vehicles since it has a low starting lift range.
Unfortunately, the paint job is bad. There is no powder coating, which makes the paint chip off easily. A bigger problem concerns reports of this the Powerzone 380035 Steel bending under the weight. So, make sure that you don’t try lifting more than two tons.
All in all, if you want to start working on your car for the first time, and you don’t mind a tool without powder coating, consider the Powerzone 380035 Steel jack stand.
Sunex 1310 Medium Height Pin Type Jack Stand
If you are looking for the best jack stand for heavy loads, then the Sunex 1310 Medium Height Pin Type jack stand might be the best option.
This sturdy jack stand weighs 59 pounds, but it has a weight capacity of 10 tons. It is a tool capable of supporting trucks and trailers.
Sunex 1310 is made of heavy-duty steel and has a base that’s over a foot wide. The base features four circular feet that prevent the jack stand from sinking into the ground. This jack stand will not wobble while holding a heavy load.
This is not a jack stand suited for low-profile vehicles, but it has a high height range. Sunex 1310 comes with a wide and flat saddle that makes it a versatile tool capable of supporting various mounting points.
The pin lock system assures stability, and the heavy-schedule pipe tube ensures that the Sunex 1310 can safely hold heavy loads.
It is weird to notice that this jack stand wobbles while there is no load. So, you should prepare the work area to ensure a safe work environment.
Finally, this is an expensive tool with limited height options, but it is the best jack stand for work on heavy machinery.
Torin T46002A Double Locking Jack Stand
If you need the best jack stand that gives you awesome value for the money, the Torin T46002A could be what you are looking for.
This high-quality jack stand is made of high-grade forged steel, which makes it a durable tool. It is a tool capable of holding up to three tons without a hitch.
Torin T46002A is a versatile tool with a wide and deep saddle. It has a dual locking paw that ensures stability. It uses a forged iron ratchet lock and a pin lock.
This jack stand has a versatile height range and is passes ANSI, ASME, and PALD safety standards. You won’t have to worry about safety with Torin T46002A.
Unfortunately, this jack stand isn’t powder coated, so be prepared to notice paint chipping. The bigger problem than the paint chipping is related to the welds. Some units come with great welds, while the others appear shoddy. So, make sure to carefully inspect your T46002A, and return it if you notice unsatisfactory welds.
All in all, this is the best jack stand you can find for the price. It is a bit heavy at 30 pounds, but it is safe to use.
If you need a jack stand with a great saddle and a good height range, consider the Torin T46002A Double Locking jack stand.